Upcycling: Make a pet bed from an old sweater

IMG_20140301_153419_936

This sweater bed is quite simple to make. Minimal sewing skills are needed for this project.

Supplies you will need:

Scissors

Yarn

Needle with an eye big enough to sew with yarn

Straight pins

A sweater

Stuffing: Material to stuff the sweater with can be anything soft. I used mismatched socks, worn out t-shirts and a little bit of cotton stuffing from the craft store.

Step 1: Gather your materials. 

IMG_20140301_143409_816

IMG_20140301_143417_224

IMG_20140301_143426_987

Step 2: Turn the sweater inside out. Use your straight pins to pin the neck opening closed. Lay the sweater flat, and pin the opening shut for easier sewing.

IMG_20140301_143813_123

Step 3: Sew the neck opening shut. You can do this by hand or on your sewing machine. 

Step 4: Turn the sweater right side out. The neck line of the sweater will look similar to this once it is sewn shut.

IMG_20140301_144503_918

Step 5: Begin stuffing the sleeves of the sweater. Fill it until you get the softness or firmness you prefer for your pet bed. The sleeves will form the sides of the bed, and will need to be sewn to the base, so do not make them too rigid or they will be difficult to work with.

IMG_20140301_144847_627

Step 6: Begin stuffing the bust area of the sweater. This part will be the back of the bed. With the sweater laying flat the stuffing in the bust area should line up with what you have stuffed into the sleeves. 

IMG_20140301_145050_068 (1)

IMG_20140301_145136_027

Step 7: Sew the bust area of the sweater with the stuffing in it, closed. These stitches do not need to be perfect. You will not see these stitches once the bed is completed.

IMG_20140301_150142_638

IMG_20140301_145419_223

Step 8: Fill the remainder of the sweater with stuffing. This will be the area your furry friend will lay on. Stuff this according to the softness your pet prefers.

IMG_20140301_150630_318

Step 9: Pin the bottom of the sweater closed and sew it shut. Straight across will do. You can do this by hand or on your sewing machine. 

IMG_20140301_151236_111

Your sweater bed should look similar to this once the bottom has been sewn closed.

IMG_20140301_151309_941

Step 10: Bring both of the openings of the sleeves together and place one sleeve edge into the opening of the other. You may want to pin the sleeves in place depending on how slippery your sweater fabric is. 

IMG_20140301_151346_952

Step 11: Sew the two sleeves together. I used a simple whip stitch to sew these together. The stitches do not have to be perfect so use whatever simple stitch you are comfortable with to sew the two sleeves together.

IMG_20140301_151904_599

Step 12: Attaching the sides to the base. Turn your pet bed over. Begin stitching the sides and the base together. Again, the stitches do not need to be perfect. A whip stitch works well here. 

IMG_20140301_151942_015

Once you have stitched all the way around the sleeves attaching them to the base, your bed is complete. This bed was made for a family of stray kitties who needed a place to stay. I am fortunate to be fostering these little sweeties until they are old enough to be adopted.

Finished Pet Bed

IMG_20140304_154759_979

Advertisements

4 thoughts on “Upcycling: Make a pet bed from an old sweater

    • This is a great idea and looks so easy too! I will have to let my daughter k now about this since she has several kitties that love to snuggle and she is great t craft things.

      Like

  1. What a great idea and so easy too. I am going to show this to my daughter who has a few kitties and she is crafty too. Good instructions and easy to follow.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s